$695.00 1

Cart

L200M Model 50 Hz

$8,495.00

The L200M is a high-performance dehumidification system that dries 1,500 to 4,000 board feet of lumber to 6-8% moisture content at minimal cost. It features auxiliary heating, circulating fans, upgraded controls with moisture probes, and over-temperature vents—everything needed except the building.

SKU: 30074004 Category: Tag:

Thousands Sold Worldwide!!

Nyle’s L200M model allows you to dry your own lumber down to 6-8% moisture content for pennies per board foot. These compact, high-performance dehumidification systems will dry between 1,500 and 4,000 board feet of lumber. The L200M includes auxiliary heating, two circulating fans, controls, a prewired electric panel, over-temperature vents, and upgraded controls with moisture probes. These kits provide you with everything you need to get going except the building itself.

Please note: 50Hz is compatible with European electricity standards. If you are in the US or Canada, you’ll need 60 Hz. Please click here for the L200M Model 60 Hz Complete.

Load Capacity

1,500 - 2,000 BF (Pine/ Poplar) - 4,000 BF (Oak)

Water Removal Rate

250 lbs/day

Drying Time

4/4 Green Pine - 80% to 8% in approximately 12 days.
4/4 Green Oak - 65% to 8% in approximately 35 days.

Temperature Range

70° - 120°F - Drying Temp
120° - 160°F - Heat Treating*

Compressor Nominal HP

2 HP

Internal Blower Motor

1/3 HP; 1,800 CFM

Auxiliary Heat

4,000 Watts

Circulating Fans

Two Included: 16" 1/3 HP, 1,800 CFM

Over Temperature Vents

One Powered Vent System Included

Power Requirements

240V, 50 Hz, Dedicated 40A Required

Dimensions

(H x L x W - Base Cabinet
37" x 32 1/2" x 20 1/2 "

Dimensions

(H x L x W - Control Box)
12" x 15" x 15"

Shipping Weight

340 lbs
© Copyright 2025 Nyle Systems, LLC
/
Sitemap

Choose your country